Tag: dough hook

  • Hand or Mixer? The Kneading Choice Nobody Should Feel Guilty About

    Knead to Know

    Hand or Mixer? The Kneading Choice Nobody Should Feel Guilty About

    And why the hook on your mixer deserves more attention than it gets.

    I’ve always used a mixer: a professional spiral mixer with two speeds, and at home an older KitchenAid Artisan HD. So when I set out to write about kneading by hand versus the mixer, I knew I was writing about the side of the argument I don’t practice every day. That’s why this post leans on bakers and sources who do, and why I’d rather give you both sides fairly than crown a winner.

    Even the strictest pizza rules accept both

    The Associazione Verace Pizza Napoletana, the body that guards the rules for authentic Neapolitan pizza, says in its published specification that the dough can be made “by hand or worked in a fork, spiral or plunger-arm mixer.” The same document warns that overworking the dough heats it up and damages the gluten network. So neither method is the “real” one. Each simply has its own way of going wrong.

    The case for kneading by hand

    The first argument is feel. The Dutch bakery Het Lage Woud kneads its bread by hand, and in the description of its baking workshop it says this is how you feel what the dough is doing, how it develops and when it needs rest. French-born baker Richard Bertinet, who runs a bakery and cookery school in Bath, built a whole method around it: he works very wet dough by slapping and stretching it on the bench, and a trade magazine review of his book says that once bakers feel “the airiness and life in the dough,” they never look back. Interestingly, he is no purist. A rye recipe in that book has the pre-fermented white dough mixed in a spiral mixer, and he suggests finishing mixer-made dough briefly by hand.

    The second argument is temperature, and it’s the one people rarely mention. Kneading creates friction, and friction is heat. King Arthur Baking’s friction factor figures show a 7-quart stand mixer adding roughly 12-13°C (22-24°F) to the dough over seven minutes, while kneading by hand for eight minutes added about 3-4°C (6-8°F). Hand-kneaded dough starts out cooler, which makes the rise easier to predict.

    Where hand kneading bites back

    Wet dough. King Arthur’s bakers define high hydration as roughly 80% and above, and say that super-wet dough sticks to everything. Their 96% panini loaf asks for a mixer outright. They also note elsewhere that bakers kneading by hand often add too much flour, and that is where the math quietly changes. Say your dough is 500g (17.6oz) of flour and 400g (14.1oz) of water, which is 80% hydration. Dust in another 50g (1.8oz) of flour to tame the stickiness and you’re now at 400 ÷ 550, or about 73%. Same dough on paper, a noticeably stiffer one in your hands.

    Is it hard on the body? Bakery data from British Columbia counts 457 accepted overexertion and repetitive-strain claims between 2019 and 2023, but that covers the whole bakery job, from lifting flour sacks to packing, and the article does not single out kneading. A 2024 systematic review adds that bakery workers’ musculoskeletal problems have been less studied than other occupational diseases. I won’t claim more than the numbers do.

    The case for the mixer, and where it bites back

    A mixer does the work, handles wet dough without a bench full of mess, and gives you the same result batch after batch. The costs are the mirror image of the hand method. You lose the feel, and the heat described above adds up. BakerPedia, an industry reference, describes what happens when you go on too long: the gluten starts to weaken, the dough turns warm and sticky, and eventually it breaks down to the point where it is “not salvageable.” Even KitchenAid tells you to knead on low speed so you don’t overheat the motor.

    The part nobody talks about: the hook

    Not every mixer works the same way. In a planetary mixer such as a KitchenAid, the bowl stays put and the hook travels around it. In a spiral mixer, both the bowl and the hook turn, which one manufacturer, Hobart, says minimizes friction and copes with very wet dough (that is a manufacturer’s claim, not an independent test). The Neapolitan rules add that a fork mixer needs longer processing times than a spiral one.

    At home, the hook is where you can actually make a difference. According to KitchenAid itself, the C-shaped hook pushes the dough against the sides of the bowl, while the spiral hook pushes it off the bottom. KitchenAid’s own C-hook comes with tilt-head mixers and some bowl-lift models, its spiral hook belongs to the large bowl-lift ones, and they are not interchangeable. Two more habits matter. Keep the speed low (KitchenAid recommends speed 1 or 2 for dough), and make sure the hook is not scraping the bottom of the bowl: KitchenAid’s own guidance describes adjusting the gap with a screw, a quarter turn at a time. On my own machine the gap is roughly 0.5cm (0.2in), but that suits my model and my hook, so check the manual for yours before you touch anything.

    There is also a market for replacement hooks. One Dutch maker, JP de Jong Parts (Superdoughhook.com, based in my own town of Waalwijk), builds stainless steel hooks for KitchenAid and many other machines. Full disclosure: I know the owner, and I have sold his hooks in my webshop Ovenwinkel.com, so read this as the maker’s view and not as an independent test. At home I use his JP12, an aluminium spiral hook, on my older Artisan HD, and on my machine the dough clearly climbs less than with the original hook. In his FAQ he describes the standard C-hook as moving the dough only horizontally, and his spiral hook as moving it horizontally and vertically, pushing the dough down so it climbs less. What I appreciate is that he also states the limits: for a home mixer, no more than 800-900g (28-32oz) of flour, never faster than speed 2, and for a lot of bread, a real spiral mixer.

    Home spiral mixers exist now, too. Ooni’s Halo Core takes 0.5-2.5kg (1.1-5.5lb) of dough and the Halo Pro 1-5kg (2.2-11lb), according to Ooni’s own pages. I haven’t used either, so I’ll only pass on what the maker says.

    Kneading by hand vs mixer: so which one?

    Small batches, firmer doughs and a love of the feel point to your hands. Wet doughs, bigger batches and a busy schedule point to a mixer. Either way, keep an eye on the dough’s temperature after kneading, because it is a big part of how fast the dough rises.

    One honest disclaimer

    I’ve used mixers all along, so the hand-kneading side of this post comes from the bakers and sources linked above, not from my own daily practice. If you knead by hand every day, you know things about it that no general summary can tell you.

    One practical tip for hand kneaders: every handful of flour you add changes your hydration. Put the adjusted numbers into our baker’s percentage calculator and you’ll know what dough you really ended up with. And once you know how your dough comes out, the Bake Planner can help you schedule the rise.

    — Rob